|
Appliance Insulation:
Basotect®, Lupranate® Isocyanate and Styropor® EPS are used to insulate against
heat transfer and noise to help make appliances that are quieter and more efficient.
Basotect® - Melamine-based foam Visit www.basotect.com for more information. Visit
www.basotect.com for more information.
Styropor® expandable polystyrene (EPS) can be used in areas where a highly insulating rigid foam with
compressive strength is needed. Visit www.styroporeps.com for more information.
Lupranate Isocyanate is easily processed to produce fine-celled
rigid foams with excellent insulation and strength properties. Its low functionality imparts good flow characteristics to the foam, ensuring uniform and
complete fill of the appliance wall cavities. Visit www.styroporeps.com
for more information.
Back
|
|
Refrigerator Hinges:
Ultramid® A3WG10 is a 50% glass fiber reinforced
injection molding PA66 grade, offering extremely high strength and stiffness for metal replacement in door hinges and other structural parts.
Back
|
|
Refrigerator Handles:
Painted Refrigerator Handles: Ultramid® SEGM35 H1 is a 40%
glass/mineral reinforced PA6 injection molding grade. It offers enhanced surface appearance in gas assist molding for excellent paintability in either
powder coat or liquid paint in applications such as refrigerator handles.
Back
|
|
Refrigerator Ice Maker Parts:
Ultraform H 2320 006 Q600 is a POM with high molecular weight grade for injection molding. It conforms to FDA requirements of 21 CFR 177.2470. Ultraform
acetal grades combine high rigidity with mechanical strength, good elastic properties, high toughness, dimensional stability and excellent sliding friction
properties.
Back
|
|
Dishwasher Rollers:
Ultramid® NBX-0025 is a specialty NSF approved, unfilled PA6/6,
with excellent lubricity and wear resistance for dishwasher rollers.
Back
|
|
Dishwasher Rack Guides (Height Adjuster):
Ultraform® N2320 is a fast cycling general-purpose injection
molding grade copolymer acetal for offering excellent lubricity, dimensional stability and stiffness in hot water and detergent environments.
Back
|
|
Dishwasher Door Latch:
Ultramid® C3U is an injection molding, general purpose PA6/66 grade
with UL flame retardant. V-0 Rating for use in door components and latches.
Back
|
|
Oven Control Panel:
Ultradur® B 4040 G3 FR is a UL 94-5V flame rated, 15% glass reinforced PBT/PET blend, formulated to not only withstand exposure to high heat, but to retain
its excellent color, surface finish and high gloss. It is an ideal replacement for thermosets and painted steel in appliance control panels. Available in
appliance or specialty colors by request.
Back
|
|
Oven Handle:
Petra® 7010 PET is a 15% glass fiber reinforced, injection molding
compound available in appliance colors or specialty colors by request. Formulated for superior surface aesthetics in gas-assist molding, it exhibits
excellent melt stability and high flow over a broad range of processing conditions. The combination of high strength and dimensional stability enable its
use in structural applications designed for metal or thermoset.
Back
|
|
Oven Vent Panels:
Ultradur® B4040 G3 HT PBT is a 15% glass reinforced, injection
molding PBT available in appliance colors. It is a resin for molding household appliances and equipment which must be resistant to chemicals and other
media, and be capable of producing an excellent surface finish. In addition, some types of kitchen equipment have to withstand high temperatures. B4040G3
HT's resistance to high sustained-service temperatures makes it a material of choice when things get hot.
Back
|
|
Oven Knobs:
Ultradur® B 4520 PBT is a medium viscosity, rapidly freezing
injection molding grade, available in white, black, bisque or specialty colors by request.
Back
|
